Gamma's Grounding Kit builds off of the concept of our popular Slide Lock. Fasten the grounding wire then enclose the stripped cable in our weather tight enclosure. Lastly, seal the enclosure with the slide locking mechanism.

Our Tower Utility Knife, helps eliminate the issues with using conventional blades to remove cold shrink tubing from cables. The Tower Utility Knife’s unique, 2 blade design, protects the cable and reduces the risk of injury to operators.

If you're a contractor who wants connections to remain untouched, here's your solution. The Gamma Tamper Lock is a rugged, plastic casing that goes over 4.3-10 and Type N connections to keep prying hands out.

Gammas SDL-TNL-152 cold shrink provides excellent physical protection and moisture sealing for telecom connectors and cables. Silicone Cold Shrink for NEX10 or Type N connectors, to LMR-195 cable or larger.

Gamma's RF Weatherproof Boot is the fastest and easiest form of RF weatherproofing to install and uninstall. Slide it up and over the connector to install and you're done.

Slide Lock is an easy to install weatherproofing enclosure for RF cable connections. Simply place the enclosure around the cable/connection and slide the lock into place to get an IP68 rated weatherproofing seal on 7/16 DIN and 4.3-10 connections.

This video compares the installation for three of our top RF weatherproofing products: Gamma Cold Shrink, a Gamma RF Weatherproof Boot, and a Gamma Slide Lock. These 3 RF weatherproofing options all install in less than 30 seconds (combined).

Our Magic Tape seeks to make this process a bit easier as the Ethylene Propylene Rubber (or EPR) material used in our tape adheres to itself without glue. For that reason, it is sometimes referred to as “Cold Shrink Tape.”

EPDM cold shrink and Silicone Cold Shrink both have their place but there is one glaring difference between the two: shrink ratio.